T+A A200 Power Amplifier Colour Silver
T+A A200 Power Amplifier Colour Silver
T+A A200 Power Amplifier Colour Silver
T+A A200 Power Amplifier Colour Silver
T+A A200 Power Amplifier Colour Silver
T+A A200 Power Amplifier Colour Silver
T+A

T+A A200 Power Amplifier Colour Silver

T+A A200 Silver

No review

|Submit a review

$629999

 

Ecofees included

Product not available

BAIE-COMEAU (418) 589-5436

Contact the store

Contact the store

BAIE-SAINT-PAUL (418) 665-0005

Contact the store

Contact the store

BOISBRIAND FAUBOURG BOISBRIAND

Contact the store

Contact the store

BONAVENTURE (418) 534-3281

Contact the store

Contact the store

BROSSARD QUARTIER DIX30

Contact the store

Contact the store

CHARLEVOIX (418) 665-0005

Contact the store

Contact the store

CHIBOUGAMAU (418) 748-3325

Contact the store

Contact the store

COATICOOK (819) 849-9997

Contact the store

Contact the store

DOLBEAU/MISTASSINI (418) 276-6794

Contact the store

Contact the store

DOLLARD-DES-ORMEAUX

Contact the store

Contact the store

EDMUNDSTON (506) 735-6704

Contact the store

Contact the store

GRANBY

Contact the store

Contact the store

JOLIETTE

Contact the store

Contact the store

LA SARRE (819) 333-6710

Contact the store

Contact the store

LAVAL

Contact the store

Contact the store

MATAGAMI (819) 739-3883

Contact the store

Contact the store

ONLINE STORE

Contact the store

Contact the store

RIVIÈRE DU LOUP (418) 862-8532

Contact the store

Contact the store

ROBERVAL (418) 275-3819

Contact the store

Contact the store

SALABERRY-DE-VALLEYFIELD

Contact the store

Contact the store

SHAWINIGAN (819) 539-0808

Contact the store

Contact the store

ST-BRUNO

Contact the store

Contact the store

ST-GEORGES (418) 228-2676

Contact the store

Contact the store

ST-HYACINTHE

Contact the store

Contact the store

ST-JEAN-SUR-RICHELIEU

Contact the store

Contact the store

ST-JÉRÔME

Contact the store

Contact the store

ST-SAUVEUR (450) 744-0444

Contact the store

Contact the store

STE-MARIE DE BEAUCE (418) 387-3242

Contact the store

Contact the store

TERREBONNE

Contact the store

Contact the store

Mains Section

In spite of their advantage in terms of efficiency, conventional switching mains sections have an inherent drawback: they generate interference in the form of induced interference, which has a consistently adverse effect on sound quality. Our response to this is to employ our T+A High-Frequency sine-wave mains sections: their pure sine-wave output and higher frequency – more than twice as high as conventional mains sections – effectively eradicate this interference. The final trace of induced interference is eliminated by the intelligent recharging of the T+A reservoir capacitors fitted to the units. Over many years of development T+A engineers succeeded in developing capacitors which recharge 100,000 times per second – 2,000 times faster than conventional capacitors. This is necessary in order to ensure that they respond to extremely brief signal spikes, and are always able to deliver the correct quantity of electrical energy. Our sine-wave mains sections are “hard” units, i.e. they do not collapse even under the most severe load; they provide the output stages with absolutely constant voltage.

 

Output Stage

The A 200 Class D output stages incorporate PURIFI Eigentakt™ technology. This platform, developed by the Danish technology company, is currently the world’s leading fundamental design for Class D output stages, as it eradicates the disadvantages of the previous generation of digital amplifiers. Until now digital amplifier designs were limited by their high dependence on the impedance of the loudspeakers connected to the system, by distortion in the output signal, by phase noise and increased distortion at high power levels. In contrast, the outstanding feature of this new circuit design is its outstanding measured data, making it the obvious choice for audiophile applications

Extremely low distortion factor and intermodulation distortion at all power levels
Extraordinarily low noise
High damping factor
Clean clipping
Low losses, high efficiency
Totally linear frequency response up to 60 kHz
Completely loudspeaker-load independent characteristics (see measured curves into 4 Ohms and without loudspeaker-load)

Intelligent Safe Control

Our Intelligent Safe Control (ISC) is comparable with the ABS of a sports car: the micro-controller uses numerous sensors to provide constant monitoring of the temperature, load or clipping states, and intervenes in an intelligent manner in order to return the parameters to their permissible range.

 

Frequency Response

The frequency response is totally linear up to 60 kHz and completely independent of the connected loudspeaker. The measured curves show that there is no difference in frequency response between a 4 Ohms loudspeaker load and no loudspeaker load.

 

HV Circuit Topology

Our HV circuit technology is unique in the world, and is employed in the voltage amplifier stage. The high operating voltage resulting from the overall circuit design ensures extremely linear reproduction of the audio signals, and provides totally natural imaging and dynamics from every recording – without compromise, and without limitation. The technology also eliminates harsh feedback, to which audio sound is very sensitive.

The A 200

In designing the A 200 output stage it was our goal to combine maximum amplifier power with audiophile sound characteristics. On the one hand this means 250 Watts of continuous power per channel, and on the other hand this substantial power does not result in a reduction in terms of subtle detail, resolution and fine dynamics. Its heatsinks are both a technical necessity and a design statement: they show off every Watt of power in impressive style as well as ensuring efficient heat dispersion – even under maximum load. The A 200 output stage was developed with the aim of functioning either as a potent complement to an existing system, or as the high-performance end of a perfectly matched chain of specialised audiophile devices in combination with the Series 200.

We only believe in power when we can use it in practice with efficiency and precision. In our search to achieve the optimum blend of sound quality, power and efficiency, we have developed a completely new circuit topology which combines T+A’s unique HV and High-Frequency sine-wave mains power supply technology with that of the PURIFI Eigentakt™ output stages. By this means we have succeeded in converting raw power into unsurpassed audiophile performance. All circuits and circuit boards are designed and executed by our own development team, and the PURIFI modules implemented within them. The damping factor of the A 200 can be reduced if a warmer or softer sound image is desired in combination with particular loudspeakers.

DIMENSIONS

Height : 10 cm / 4 inches

Width : 32 cm / 12.6 inches

Depth :  34 cm / 13.4 inch

Weight : 5 kg / 11 lbs

OUTPUTS

Nominal Input Power : ◊ 250 Watts @ 4 Ohms ◊ 125 Watts @ 8 Ohms

Frequency Response (-3db) : 1 Hz – 60 kHz

Signal to noise ratio : 113 dB

THD : < 0,002 %

Intermodulation : < 0,002 %

Channel Separation : > 103 dB

Damping Factor : > 800 / DF LO > 70

Input Sensitivity : High level (RCA) 800 mVeff / 5,8 kOhms Balanced (XLR) 1,6 Veff / 20 kOhms

SHIPPING DIMENSIONS

Height : 21 cm / 8.27 inches

Width : 41 cm / 16.14 inches

Depth : 44 cm / 17.32 inches

Weight : 7.3 kg / 16.09 lbs

SYSTEM

Surface Finish : Aluminium silver anodized

Mains Voltage : 200 – 240 V, 50 – 60 Hz

Power Consumption : max. 600 Watts 25 Watts while power on and idling with no signal

Standby Consumption : < 0,5 Watts

Supplied Accessories : Power cord, E2-Link-cable

UPC

UPC :

No information

0

No review

0  received reviews

Connectez-vous pour donner un avis

Submit a review

full-star-rating full-star-rating full-star-rating full-star-rating full-star-rating

0/5